Receiving a digital call alert, Transmitting a digital call alert – Midland Radio SYN-TECH III P25 User Manual

Page 51

Text mode
Original mode

Syn-Tech III P25 Portable Radio

OPERATION MANUAL

680-090-2040
Version 6.0

http://www.midlandradio.com

4.2.7

Receiving a Digital Call Alert

A call alert is normally used as a low priority
request to return the call when it’s more
convenient. When a call alert is received the
radio will display the unit ID of the initiator.

4.2.8

Transmitting a Digital Call Alert

Press the Call Alert key (default:

pound key) until “CALL

ALERT:” is displayed. Enter the
destination unit ID or press the left
soft key for INDEX. Press the left
soft key (SEND) to send the call
alert. The radio will send up to four
call alert requests.

Call alert
transmissions may
be disabled in radio
programming.

Figure 4.40 – Receiving a call alert

Press Call

Alert key

Enter unit ID

or press

INDEX

Press SEND

Figure 4.41 – Initiating a call alert request

If unit ID is does

not answer