Midland Radio SYN-TECH III P25 - Manual (Page 16)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
8
3.2.11.1 Switching Talk Group
The first press of the ∗ key may prompt “TALKGROUP:” to enter a new talk group. This
function is only available in digital mode and the entered talk group must be in the
selected zone’s talk group list.
3.2.11.2 Entering/Exiting All Call Mode
Successive presses of the ∗ key may prompt “ENTER TO ALL CODE MODE?” or
“EXIT ALL CODE MODE?” to enter/exit all call mode. This function is only available in
digital mode. All call mode implements a call to all talk groups using the channel.
Transmitting all calls may be disabled by radio programming.
3.2.11.3 Entering/Exiting Talkaround Mode
Successive presses of the ∗ key may prompt “ENTER TO TALKAROUND MODE?” or
“EXIT TALKAROUND MODE?” to enter/exit talkaround mode. This option is not
available on simplex (direct) channels. The talkaround function sets the transmitter to
the programmed receive frequency/CTCSS/DCS/NAC.
3.2.11.4 Switching to Home Zone and Channel
Successive presses of the ∗ key may prompt “GO TO HOME?” to switch to the home
zone and channel.
3.2.11.5 Adding to Command Zone
Successive presses of the ∗ key may prompt “ADD TO COMMAND ZONE?” to add the
current channel to the command zone.
3.2.12 Pound key
The # key is a multi-function key allowing selection of several functions with successive
presses. The available functions depend on analog/digital mode. In digital mode the
zone select, status set, individual call, telephone call and call alert functions may be
available. In analog mode the zone select, selective call and two tone call functions
may be available.
3.2.12.1 Switching Zones
The first press of the # key may prompt “ZONE NO:” to switch zones. The up/down
keys will scroll through the available zones. Or, the zone number may be entered using
the numeric keypad. The left soft key selects the displayed zone and the right soft key
exits without changing zones.