Midland Radio SYN-TECH III P25 - Manual (Page 31)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
23
4.1.5.1 Analog Transmissions
1. Press the TX Mode Change key
repeatedly until analog transmit
mode is displayed. Depending on
channel programming, the analog
transmit mode may display the
Analog Transmit icon (
), Analog
CTCSS Transmit icon ( ) or
Analog CDCSS Transmit icon
(
).
2. Ensure that the channel is clear.
3. Press and hold the push to talk key
(PTT). The Transmit/Receive LED
will light red while transmitting.
4. Hold the microphone approximately
two inches from your mouth and
speak in a clear, normal voice.
Keep the PTT switch pressed until
you have finished speaking.
5. Release the PTT switch to return to
standby mode and receive any
reply.
Figure 4.13 – Analog transmit displays