Midland Radio SYN-TECH III P25 - Manual (Page 24)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
16
Enter 6-8
digit
password
Press OK
to
continue
Figure 4.3 – Power-on password entry
4 OPERATION
4.1 Basic Operation
Despite the radio’s advanced feature set, the basic receive and transmit operations can
still be quite simple. The radio is capable of distinguishing between analog and digital
signals, and the channel may be configured to receive both signal types with no user
intervention. The radio channel may also be configured to allow users to transmit
analog signals, digital signals, or choose the appropriate transmit mode. The radio may
also automatically switch the transmit mode after receiving a different mode signal. The
radio will switch back to the selected mode after a time period.
4.1.1 Turning the Radio On and Off
Rotate the On/Off Volume Knob clockwise past
the detent to turn the radio on. Rotate the knob
further clockwise to increase the speaker
volume. Rotate the knob counter-clockwise to
decrease the speaker volume. Rotate the knob
counter-clockwise past the detent to turn the
radio off.
While the radio is performing power-on self-
tests, it will display the greeting message and
the current zone selection. If the channel switch
is in the sixteenth position, the radio will power-
on to the last selected channel. In any other
position the radio will power-on to the
switch-selected channel.
If a power-on password has been set,
the radio will prompt for power-on
password entry when it is turned on.
Use the numeric keypad to enter the
correct 6-8 digit password, then press
the left soft key (OK).
Figure 4.1 – On/Increase Volume
Figure 4.2 –Off/Decrease Volume