Your mobile device contains a transmitter and receiver. When it is ON, it receives and
transmits RF energy. When you communicate with your mobile device, the system handling
your network access controls the power level at which your mobile device transmits.
Your mobile device is designed to comply with local regulatory requirements in your
country concerning exposure of human beings to RF energy.

RF Energy Interference/Compatibility

Nearly every electronic device is subject to RF energy interference from external sources if
inadequately shielded, designed, or otherwise configured for RF energy compatibility. In
some circumstances, your mobile device may cause interference with other devices.
Follow Instructions to Avoid Interference Problems
Turn off your mobile device in any location where posted notices instruct you to do so, such
as hospitals or health care facilities.
In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If
your mobile device offers an airplane mode or similar feature, consult airline staff about
using it in flight.
Implantable Medical Devices
If you have a medical device, including an implantable medical device such as a pacemaker
or defibrillator, consult your healthcare provider and the device manufacturer’s directions
before using this mobile device.
Persons with implantable medical devices should observe the following precautions:

Your battery or mobile device may require recycling in
accordance with local laws. Contact your local regulatory
authorities for more information.

Do not dispose of your battery or mobile device with your
household waste. See “Recycling” for more information.

Do not use tools.

For indoor use only.

Symbol

Definition

032375o

• ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the

implantable medical device when the mobile device is turned ON.

• Turn OFF the mobile device immediately if you have any reason to suspect that

interference is taking place.

Specific Absorption Rate (FCC & IC)

SAR (IEEE)

YOUR MOBILE DEVICE MEETS FCC & IC LIMITS FOR
EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the
limits for exposure to radio waves (radio frequency electromagnetic fields) adopted by the
Federal Communications Commission (FCC) and Industry Canada (IC). These limits include a
substantial safety margin designed to assure the safety of all persons, regardless of age
and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The highest
SAR value under the FCC and IC guidelines for your device model is listed below:

During use, the actual SAR values for your device are usually well below the values stated.
This is because, for purposes of system efficiency and to minimize interference on the
network, the operating power of your mobile device is automatically decreased when full
power is not needed for the wireless connection. The lower the power output of the
device, the lower its SAR value.
If you are interested in further reducing your RF exposure then you can easily do so by
limiting your usage or simply using accessories to keep the device further away from the
body.
Additional information can be found at www.motorola.com/rfhealth.

European Union Directives Conformance
Statement

EU Conformance

The following CE compliance information is applicable to Motorola mobile devices that
carry one of the following CE marks:

Hereby, Motorola declares that this product is in compliance with:

Body SAR

Wi-Fi, Bluetooth

1.52 W/kg

0168

[Only Indoor Use Allowed In France
for Bluetooth and/or Wi-Fi]

0168