Muratec MFX-1950 - Manual (Page 157)

10-7 u
ser settInGs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
e
r
s
e
t
t
In
G
s
7. Resolution Default setting for copy resolution.
600dpi The machine makes a high resolution copy (600 dpi × 600
lpi), but it also requires more memory than the normal copy
resolution.
300dpi The machine makes copies with normal resolution (600 dpi ×
300 lpi).
8. Copy Charge Sets the per page copy charge from $00.00 to 99.99 (page 9-10).
$00.00
Scanner settings
The scanner settings allow you to customize various scanner functions to match your needs.
Accessing the scanner setting
1
Press
[Program] No.24_
4 Scanner Settings
2
Press .
[Program] No.241
1 Scan Parameters
3
Use or
to search the item you want to set or change and press .
4
Change settings and press . For details of each setting, refer to the following
table:
5
When you have finished, press to return to the standby mode.
The underlined settings are factory defaults.
1. Scan Parameters Doc. Type You can choose one of the following.
Text, Photo&Text, Photo
Resolution You can choose one of the following.
200 dpi, 300 dpi, 600 dpi
Contrast You can choose one of the following.
Normal, Dark, Darkest, Light, Lightest
2. Auto Reset Auto Reset Time
Sets the time (minutes) for the scan parameters to return to their
default condition. You can change this time from 01 to 10 minutes.
03 min.
Reset After Scan
You can program the settings to return to their default condition as
soon as scanning has been completed.
On, Off
For details of scanner settings, refer to the PDF manual on the GDI Printer / Scanner Driver CD sup-
plied with the machine.