Muratec MFX-1950 - Manual (Page 63)

3-9 a
utodIaLLer
& d
IaLLInG optIons
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
a
u
t
o
d
Ia
L
L
e
r
&
d
Ia
L
L
In
G
o
p
t
Io
n
s
Call group dialing
If you frequently send the same fax message to several destinations, use call group
dialing. Call groups can store many one-touch keys and speed-dial numbers, so you can
broadcast the fax message by simply performing the group dialing operation.
Entering or changing a call group
Your machine can store up to 32 call groups.
1
Press
shown:
Enter Group No.
01:No Number Stored
2
Press or
to select a call group number.
You can also select a call group by directly entering that two-digit identifier code (01-32).
3
Press .
01:Enter One-T/Speed
_
4
Enter the one-touch and speed-dial numbers you want to store into the call group by
pressing the one-touch key or followed by three-digit code. A
comma will automatically be inserted between each number.
01:Sales division
[01],[03],S001_
If you want to enter all the one-touch and speed-dial numbers currently stored in your
machine, press <*> without any characters.
01:Enter One-T/Speed
*_
5
Press .
01:Name ;Upper
_
6
Use the numeric keys to name the group number.
The name can hold up to 24 characters.
(Regarding how to enter characters, refer “Entering characters” on page 2-2.)
To change the name, press or to move the cursor, and press to
erase the name. Then enter the correct name.
7
Press to save the setting.
The next empty call group will be shown.
8
To enter another call group, repeat this procedure from step 2.
To exit and return to the standby mode, press .
NOTE: To print a call group list, press
number and press .