Muratec MFX-1950 - Manual (Page 124)

7-8 c
opyInG
Combine
This feature allows you to copy two one-sided documents to one sheet of Letter-sized paper.
Document orientation on the ADF
or document glass*
Result image of combined copy
1
1
2
2
* The document glass is available only for the MFX-1950.
NOTE: • When using the ADF, enlargement copy is not available.
• This machine has no image rotation function.
1
Make sure the machine is in the copy mode.
2
Place your document on the ADF face up or on the document glass face down.
3
To make the combine copy available:
For MFX-1950 — Press . The light above the key will illumi-
nate, which means the combine key is turned on.
For F-315 — Press repeatedly until “Combine” appears, then
press . And turn on “Combine” using the cursor key and press .
4
Set the following as needed. (See “Basic copy settings” on page 7-4.)
• Document type and scanning contrast
• Number of copies
• Zoom ratio (25 to 400% for the document glass, 25 to 100% for the ADF.)
To reset the copy parameter to the default setting, press .
5
Press .
To stop the copying, press .