Muratec MFX-1950 - Manual (Page 75)

4-9 s
endInG faxes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
e
n
d
In
G
f
a
x
e
s
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press , then .
2
Press or
to scroll through currently stored broadcast commands.
C01:Broadcast

/

/

/Cancel
3
When the command you want to cancel is shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step 4 with-
out pressing .
4
To review individual numbers within this broadcast, press to see the first num-
ber. The machine shows:
9-5550388

/

/

/Cancel
5
Press or
until you find the number you want to cancel.
6
Press , .
The next number will appear and if you want to cancel this number, press
twice.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling another command, press .
To stop reviewing or canceling commands, press .
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or Remote location
• The start time (this appears in a DD,HH:MM format)
• By “Note” if the command is a specified function.
To print a delayed command list, press
Printing a stored document
Your machine can print out each document stored for delayed transmission.
To print a stored document, you will need to know the document’s command number,
which you can obtain by either reviewing the commands or printing a delayed command
list. (See above.)
1
Press
Select Comm. No.
C01:123-4567
2
Press or
to select the command number.
3
Press .