Muratec MFX-1950 - Manual (Page 100)

5-10 r
eceIvInG faxes
To change a specific digit, press to move left or to move right until the cursor
is under the digit, then use the numeric key to enter the correct number.
7
Press to save the setting.
8
If you do want to enter other number, repeat procedures from step 5.
To exit, press .
Erasing a number from the blocked numbers list
To clear a number from the list:
1
Press
Block Junk Fax:Mode2

/

/Enter
2
Press .
Select BlockJunk No.
01:5553038_
3
Press or
until you see the number you want to clear.
4
Press .
01:Erase Junk Fax
Yes  Enter
01:Erase Junk Fax
No  Cancel
5
Press to erase the number. If you want to cancel the erasing, press .
6
To clear another number, repeat procedures from step 3.
7
Press to return your machine to standby mode.
Printing a list of the blocked numbers:
To print a list of the blocked numbers, press