Answering calls manually, Answering calls manually -4 – Muratec MFX-1950 User Manual
Page 94
5-4
r
eceIvInG
faxes
Answering calls manually
NOTE: • To answer a call manually, you must install an external phone to your machine.
• Make sure the document is not set on the ADF.
Receiving a call manually with an external phone
In “Tel Ready” or “Tel/Fax Ready” mode, when the external phone rings, pick up handset:
• If you hear fax tones (“beep — beep — beep”), put the handset down, but do not
hang up. Walk to your machine and press
up the external phone’s handset. Because remote fax machines will wait several
seconds to hear reception tones from your machine, you have about 30 seconds to
walk to your machine and press
Switch between the automatic or manual reception mode
1
Make sure that the machine is in the fax mode. If not, press <
copy
4
fax
4
scan
> to
switch to the fax mode.
2
Press
Auto Rx :Off
/
/Enter
3
Press to select “On” or “Off”. • To switch to manual reception mode, select “Off” • To switch to automatic reception mode, select “On” 4 Press NOTE: If you assigned “Auto Rx” to a soft key (page 8-2), you can toggle Manual reception (Tel Ready) and Automatic reception (you have set) by pressing that key. or