Muratec MFX-1950 - Manual (Page 113)

6-9 u
sInG
f-
code features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
In
G
f
- c
o
d
e
b
o
x
f
e
a
t
u
r
e
s
Printing a document stored in a bulletin box
1
Switch to the fax mode by pressing <
copy 4 fax 4 scan
>.
2
Press
Select F-Code Box
01:Bulletin box 1
3
Press or
to select the bulletin box. Then press .
01:F-Code Document
Enter I.D. Code:****
(If the I.D. code is not set for this box, you can skip to step 5.)
4
Use the numeric keys to enter your F-code box’s four-digit I.D. code.
5
Press .
01:Select File No.
00:All Documents
6
Press or
to select the file number (1-30) of the document you want to print.
If you want to print all documents stored in the bulletin box, enter “0” (zero).
7
Press .
Your machine prints the chosen document, then returns to the standby mode.
Erasing a document stored in a bulletin box
1
Switch to the fax mode by pressing <
copy 4 fax 4 scan
>.
2
Press
Select F-Code Box
01:Bulletin box 1
3
Press or
to select the bulletin box. Then press .
01:F-Code Document
Enter I.D. Code:****
(If the I.D. Code is not set for this box, you can skip to step 5.)
4
Use the numeric keys to enter your F-code box’s four-digit I.D. code.
5
Press .
01:Select File No.
00:All Documents
6
Press or
to select the file number (1-30) of the document you want to erase.
If you want to erase all documents stored in the bulletin box, enter “0” (zero).
7
Press . The following two displays will appear alternately:
01:Bulletin box 1
Erase  Enter
01:Bulletin box 1
Not Erase  Cancel
8
Press to erase the document and to return to the standby mode.
Press to quit without erasing and to return to the standby mode.