Muratec MFX-1950 - Manual (Page 54)

2-16 G
ettInG started
4
After loading paper into the bypass tray, you need to set the correct paper size by
pressing .
(For F-315, press repeatedly until “Bypass” is displayed on
the LCD and then press .)
Bypass Tray :Ltr

/  /Enter
5
Press or
to select the paper size you want to use.
Bypass Tray :Ltr

/

/Enter
6
Press .
NOTE: You can set the default paper size for the bypass tray. See step 6 of “Setting of the
paper size” below.
Setting of the paper size
Default setting: 1st cassette: Letter, 2nd cassette (option): Letter, Bypass Tray: Letter
After loading paper into the paper cassette, you need to set the correct paper size by
using the following procedure.
1
Press
1st Cassette :Ltr

/  /Enter
2
Press or
to select the paper size you will use in the first cassette.
3
Press .
If you have the optional second cassette, proceed to step 4.
Otherwise, skip to step 6.
4
Press or
to select the paper size you will use in the second cassette.
2nd Cassette :Ltr

/  /Enter
5
Press .
6
Also, you can set the default paper size for the bypass tray. Press or
to
select the paper size for the bypass tray. After, you load the paper into the bypass
tray, you need to set the correct paper size by pressing .
Bypass Tray :Ltr

/  /Enter
7
Press .
8
Press to exit and return to the standby mode.