Muratec MFX-1950 User Manual
Page 108

6-4
u
sInG
f-
code
features
8
Use the numeric keys to enter the ITU-T-compatible password for this box. This pass-
word can be up to 20 characters in length and include any combination of numbers
and the <*> and <#> characters (but no other non-numerical characters).
To change a number, press
erase it. Then re-enter the number correctly.
9
Press
Box Type :Bulletin
/
/Enter
10
Press to select the box type, then press If you chose “Bulletin”, go on to step 11. If you setup a Bulletin box: 11 The bulletin box has the following settings: • Rx Protect — Determines whether or not the document is received in the bulletin box. Rx Protect :Off / /Enter “On” (Rx protection is on): Documents are not received in the box. set the two additional settings — “Auto print” and “Over- write Doc.” below. Press to select “On” or “Off”, then press Go on to the next one. • Auto Print — Determines whether to print a received document. Auto Print :Off / /Enter “On”: A document will be printed automatically when it is received in the bulletin box. (See page 6-9.) Press to select “On” or “Off”, then press Go on to the next one. • Overwrite Doc — Determines whether to overwrite existing (erase) the documents when the box receives a new one. This setting appears only when the “Rx protect” is set to “Off”. Overwrite Doc. :Off / /Enter “On”: The currently stored documents in the box will be replaced with a new received document. “Off”: A received document will be added in the box. Up to 30 documents (each docu- ment can include one or more pages) can be stored in each box. or
If you chose “Relay”, skip to step 13.
If you chose “Security”, skip to step 19.
“Off” (Rx protection is off): Document are received in the bulletin box and you can or
This setting appears only when the “Rx protect” is set to “Off”.
“Off”: Received documents are not printed. You will have to print them manually. or