Muratec MFX-1950 - Manual (Page 145)

9-9 s
ecurIty features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
e
c
u
r
It
y
f
e
a
t
u
r
e
s
4
Press .
01:Name ;Upper
_
5
Use the numeric keys to enter the one-touch key name.
The name can hold up to 20 characters.
(Regarding how to enter characters, see “Entering characters” on page 2-2.)
To change the name, press or to move the cursor, press to erase
the name. Then enter the correct name.
6
Press to save the setting.
7
To enter another department code, repeat procedures from step 2.
To stop entering department codes, press .
Erasing a department code
1
Press
Select Department No
001:987654321
NOTE: If the department code operation is protected, the machine beeps briefly and then
returns to the standby mode. You will have to turn off the protection first.
2
Press or
to select the code you want to erase.
3
Press . The following two displays will appear alternately:
001:Erase Dept. Code
Yes  Enter
001:Erase Dept. Code
No  Cancel
4
Press to erase the code.
To cancel, press .
5
To erase another department code, repeat procedures from step 2.
To cancel, press .
Turning the department code setting on and off
NOTE: To turn the department code setting on, at least one department code must exist in
your machine.
1
Press
Fax Department :Off

/  /Enter
NOTE: If the department code operation is protected, the machine beeps briefly and then
returns to the standby mode. You will have to turn off the protection first.
2
Press or
to select on or off for fax department management.