Masking the pin, Masking the pin -5, Activating the pin mask – Muratec MFX-1950 User Manual
Page 141: Autodialing while using the pin mask
9-5
s
ecurIty
features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
e
c
u
r
It
y
f
e
a
t
u
r
e
s
Masking the PIN
To prevent unauthorized long-distance calls, some PBX (private branch exchanger) sys-
tems require a PIN (personal identification number) entry when dialing a number.
Your machine’s PIN mask feature helps you keep that PIN number private. With the
PIN mask feature activated, you can dial a number plus a PIN, but the PIN will not
appear in a journal, error message printout, delayed command list or a TCR (transmit
confirmation report).
There are three possible settings for the PIN mask:
• “Off” — Turns off the PIN mask feature. Any PIN you enter will appear on any display
or printout which shows the number you dial.
• “Mode 1” — Each remote fax unit has a departmental PIN access code.
• “Mode 2” — Each fax user has a departmental PIN access code.
NOTE: • If you select Mode 1 and you will use a one-touch key or speed-dial number, you
must store the remote unit’s PIN access code within that number. (See “Autodial-
ing while using the PIN mask,” below for further details.)
• If you select either Mode 1 or Mode 2 and will be using batch transmission, you
must store the PIN access code within the appropriate batch box.
Activating the PIN mask
NOTE: For this feature to work, you must have activated the passcode protection as
described on page 9-2. And you must know the passcode.
1
Press