Muratec MFX-1950 - Manual (Page 115)

6-11 u
sInG
f-
code features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
In
G
f
- c
o
d
e
b
o
x
f
e
a
t
u
r
e
s
Sending a document using a subaddress and password
1
Switch to the fax mode by pressing <
copy 4 fax 4 scan
>.
2
Place the document on the ADF or document glass.
Adjust the document mode and contrast if necessary.
3
Press until “F-Code Tx” appears on the LCD then press
.
F-Code Tx

/  /Enter
– or –
Press the “F-Code Tx” soft key.
Enter Sub-Address
_
4
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press .
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
5
Use the numeric keys to enter the ITU-T password.
Then press .
If you do not need to enter ITU-T password, press without entering any num-
ber.
Enter Fax Number
_
6
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
7
Press . Your machine begins scanning the document. Then, your machine
dials and sends the document with the subaddress and password.
To cancel the sending in progress, press and ,
cel>.
To cancel the delayed sending, press , search the command
number you want to cancel using the cursor key, then press , . (See
also “Reviewing or canceling command” on page 4-8.)
NOTE: • The document glass is available only for the MFX-1950.
• If you frequently dial the same destination with a subaddress (and password), use the
macro key at your convenience. For details of the macro key, see page 8-4.