Mitel 5320 - Manual (Page 69)

Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 3, September 2009 Page 55
Cordless Devices (5330/5340 IP Phones Only)
Pairing the Cordless Module and Devices
Before using the cordless handset or headset, each device must establish communication with
the cordless module using a procedure called pairing.
To pair a cordless device:
1. Ensure that the battery of the cordless device to be paired is at least partially charged.
2. Press and hold down the pairing button on the back of the cordless module
(see page 54 ) for five seconds to activate phone pairing mode. The LED on the cordless
module blinks. The Cordless Devices application opens on the phone and prompts you
to press the pairing button on the cordless device.
3. Press and hold down the hookswitch on the cordless handset or headset for five
seconds to activate the device pairing mode. The LED on the cordless device blinks.
After a moment, the Cordless Devices application displays information for the device to
be paired.
4. Press Yes to confirm pairing. The Cordless Devices application confirms the pairing by
displaying the paired device name and its battery level indicator and the number of
devices paired.
5. Press Close to exit.
To unpair a cordless device:
1. Press the blue Applications key, and then press Cordless Devs.
2. Press the device name you want to unpair. The information screen for the selected
device appears.
3. Press Unpair this Device. If the device is in use, an error message appears. Otherwise,
the device is unpaired, removed from the display, and can no longer be used to interact
with the phone.
4. Press Close.
The cordless module has a blue LED that indicates the current status of the module. The
handset is blinking, when the LED is on and off for an equal amount of time.
NOTES
An IP phone can have only one cordless handset and one cordless headset.
A cordless handset or headset can be paired with only one IP phone at a time.
Pairing a new cordless handset or headset with the IP phone overwrites the
configuration of any previous handset or headset.
Pairing cannot be performed when the cordless device is already in use.
Blue LED Function
Solid Audio is active between the module and either the
handset or headset.
Blinking Pairing mode is active or a firmware upgrade is in
progress.
Off No audio is active.
Solid for two seconds Pairing is successful.