Mitel 5320 - Manual (Page 22)

Getting Started
Page 8 Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 3, September 2009
Headset Instructions
When using a headset, press (Speaker) to connect to or disconnect from calls. The
Headset icon appears when the headset is in use. You cannot use the handset or
speakerphone when the phone is in Headset Mode. Disconnecting the headset automatically
enables the handset.
To connect and activate the headset:
1. Insert the headset jack into the Headset port located on the back of the phone.
2. Dial 317 (Headset on/off). HEADSET MODE ON appears.
To turn off Headset Mode and activate the handset and speakerphone:
Dial 317 (Headset on/off). HEADSET MODE OFF appears.
System Information
You can use the phone to view system or phone information.
To view system information:
1. Press (Applications).
2. Press About 5320/5330/5340 IP Phone. A screen similar to the following appears.
3. Press Close to exit the Applications menu.
NOTES
The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has
enabled the “Headset Connect Tone” feature. If this is not enabled, you may miss
the first few seconds of an incoming call.
NOTE
Because Headset Mode disables the handset and speakerphone, you
must turn off Headset Mode before you can use the handset or
speakerphone.