Mitel 5320 - Manual (Page 41)

Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 3, September 2009 Page 27
Answering and Placing Calls
Deleting Speed-Dial Entries
To delete a Station Speed-Dial entry:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial locations.
• Enter the speed-dial location (0 to 9).
3. Press # or the ACCEPT menu button (5340 IP Phones only) to select the location.
4. Press
(Hold) repeatedly until the name is erased, and then press # or the
ACCEPT menu button (5340 IP Phones only) to continue.
5. Press (Hold) repeatedly until the number is erased, and then press # or the
ACCEPT menu button (5340 IP Phones only). STN SPD BIN # <number> UPDATED
appears.
Assigning Speed-Dial Entries to Programmable Buttons
You can assign Station or System Speed-Dial numbers to your programmable buttons.
To program a System/Station Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to program as a speed-dial button.
3. Dial 382 (Station Speed Dial) or 381 (System Speed Dial).
4. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial locations.
• Enter the speed-dial location (0 to 9 for Station Speed-Dial or 000 to 999 or 0000 to
4999 for System Speed Dial), or select the menu button designation from the
display (5340 IP Phones only).
NOTE
Before assigning the speed-dial number to a programmable button, make sure the
number has either a Station or System Speed-Dial code assigned to it.