Mitel 5320 - Manual (Page 67)

Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 3, September 2009 Page 53
Cordless Devices (5330/5340 IP Phones Only)
Cordless Devices (5330/5340 IP Phones Only)
You can use the cordless handset and cordless headset to move around within your office or
adjacent offices. The cordless headset and handset are optional accessories, ordered
separately. For more information, contact your system administrator or local Mitel provider. Both
cordless devices connect to your phone through the cordless module, which attaches to the
back of the phone. The cordless headset rests and recharges in a headset cradle that attaches
to the side of the phone. The cordless handset recharges in the handset cradle.
The Cordless Devices Application provides access to the configuration settings and information
screens that apply to the cordless module and accessories. For more information, see “Pairing
the Cordless Module and Devices” on
page 55 .
The cordless module is shown here. The phones features are explained below.
NOTE The 5320 IP Phone does not support a cordless module or cordless devices.
1
5
2
4
3
Feature Function
1 – Cordless Module Attached to the back of the phone, the module contains a light-
emitting diode (LED) indicating that a cordless device is in use;
also indicates the pairing of module and a cordless device.
2 – Cordless Headset Cordless handsfree operation for calls. If you are using the
cordless headset, you do not need to use the handset.
3 – Cordless Headset Charging Cradle Provides power to recharge the cordless headset battery.
4 – Cordless Handset Charging Cover Provides power to recharge the cordless handset battery.
Replaces the cover supplied with the phone for corded handsets.
5 – Cordless Handset Cordless operation for handset calls. (You can transfer from the
phone handset to the cordless headset at any time.)