Mitel 5320 - Manual (Page 40)

Answering and Placing Calls
Page 26 Mitel ® 5320/5330/5340 IP Phone User Guide – Issue 3, September 2009
To use the dialpad to enter characters:
Press the dialpad buttons as shown in the following table.
For example, to enter May 31, you could use the following sequence:
1. In Alpha Mode ( [Message] button is lit), press 6 once to enter an “M.”
2. Press 2 once to enter an “A.”
3. Press 9 three times to enter a “Y.”
4. Press
(Transfer) to enter a space.
5. Press (Message) to switch to Numeric Mode.
6. Press 3.
7. Press 1.
8. Press (Speaker), #, or lift the handset to save the entry.
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
Do one of the following:
• Dial 382, and then enter the Station Speed-Dial location number (0 to 9). The
system dials the number.
• Press (Up) or (Down) to scroll through the speed-dial locations, and then
press # to select the location and dial the number.
Button
Characters Represented
(in Alpha Mode)
0 @ : . , 0
1 - & ( ) 1
2 A B C ‘ 2
3 D E F ! 3
4 G H I * 4
5 J K L # 5
6 M N O ñ 6
7 P Q R S 7
8 T U V ? 8
9 W X Y Z 9
NOTE
You can also use a Station Speed-Dial button assigned to the number
you are dialing. See “Assigning Speed-Dial Entries to Programmable
Buttons” on
page 27 .