Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 75)

ALE Programming
• AMD Yes
• ILNK No
• BDLK No
When configuring ALE options, you do not need to define all parameters – change
only those for which the factory-default values are not suitable.
Auto Dial Parameters
Auto Dial enables you to set shortcuts for calls to frequently called stations, with or
without automatically attaching messages when a station is called:
• AUTO Used to configure up to 10 autodial codes, numbered AUTO 0 to
AUTO 9.
• AMD Used to prepare AMD messages for sending when an autodial
code is used. See message preparation details on page 30.
Note
If a message is attached to the address, an exclamation mark
precedes the address.
Storing ALE Parameters
Before exiting the ALE programming menu, you must store the parameters you have
programmed.
Important
If you press the MENU or ESC key to exit the programming mode
without first saving your changes, you will be prompted to store the
ALE configuration changes. Press
YES to store the configuration.
If you press NO, the configuration will revert to the previous
configuration, and any changes made in the ALE programming
session will be ignored.
_________________________________________________________________________________________________
61