Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 41)

New ALE Features
6. After the link is established, you will see a LINK message. Now you may
press the PTT and start talking.
7. To disconnect the link, press the ESC key.
➤ To transmit on a specific channel:
1. Initiate a call as explained above (page 25 or 26)
and select the desired station.
CALL
1009
MOTOROLA
SEND PAGE CHAN MON s
2. Press CHAN (F3) to select a specific channel.
The channel with the best LQA score is displayed.
The speaker is unmuted to enable you to check the
channel quality by listening to it.
CALL
CH 3 30%
MOTOROLA
SEND PAGE BEST MONs
Note
If the name of the called station has been edited and the new
station name is not in the directory, no LQA score is displayed.
3. Press BEST (F3) to select the channel with the best LQA score ...
Note
If the name of the called station has been edited and the new
station name is not in the directory, the channel displayed after
pressing
BEST (F3) is the first scanned channel of the net.
… or
Press the UP / DOWN keys to scroll to the channel of your choice.
Note
You can use this option to transmit a call to a station operating in
the Channel mode. If the other station is in the Channel mode,
your radio switches to the Channel mode for the duration of the
call, and then returns to the ALE mode after the link to that station
is disconnected.
4. Press SEND (F1) or ENTER to initiate the call.
5. The radio now starts the link set up process. During this process, you will
see TO alternating with the number of the channel on which the set up
request is being sent (the channel may change, if the called station does not
answer on the first channel(s)).
_________________________________________________________________________________________________
27