Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 45)

New ALE Features
➤ To send a message during a call (link state):
1. Press PAGE (F2).
Note
If this function key is not displayed, you
cannot send a message in the present
mode.
LINK
1009
MOTOROLA
SEND PAGE CHAN MONs
2. Select or edit the desired message as explained on
page 29.
3. Press SEND (F1) or ENTER to send the message.
AMD11
11 AMD MESS
MOTOROLA
SEND EDIT CHAN <-> s
4. The radio now starts the link set up process for this
message (this process is similar to the process used
to set up the link for this call). During this process,
you will see TO alternating with the number of the
channel being used. TO
1234
MOTOROLA
STOP PAGE CHAN MONs
Note
• While the radio is initializing the
link, you can press STOP (F1) or
ESC to abort the entire process.
• If the link needed to send the
message to the selected station
cannot be set up, you will see for a
few seconds a flashing NO LINK
message.
CH 2
1234
MOTOROLA
STOP PAGE CHAN MONs
_________________________________________________________________________________________________
31