Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 40)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide
5. After the link is established, you will see a LINK
message. Now you may press the PTT and start
talking.
LINK
1234
MOTOROLA
SEND PAGE CHAN MONs
Note
If the link with the selected station cannot be set up, you will see
for a few seconds a flashing NO LINK message.
6. To disconnect the link, press the ESC key.
Note
If you want to call again the same station, double-press the PTT to
use the quick-call feature (see page 28).
➤ To transmit an individual call with MultiNet ON:
1. Press CALL (F1).
The radio displays the current net number, flashing.
If you wish to change the currently used net, press
the
UP / DOWN keys or enter the net number on the
keypad.
ALE
NET# 7
MOTOROLA
2. Press ENTER to confirm the net number.
3. The radio displays the last called station.
CALL
1001
MOTOROLA
SEND PAGE CHAN MON s
Press the UP / DOWN keys to scroll between
stations, or use the keypad to enter a station name
and then press
SAVE (F1) or ENTER when the
required station name appears.
CALL
1009
MOTOROLA
SEND PAGE CHAN MON s
4. Press SEND (F1) or ENTER to initiate the call
5. The radio now starts the link set up process. During this process, you will
see TO alternating with the number of the channel the set up request is
being sent (the channel may change, if the called station does not answer on
the first channel(s)).
Note
While the radio is initializing the link, you can press STOP (F1)
or ESC to abort the entire process.
26
_________________________________________________________________________________________________