Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 67)

ALE Programming
ALE Programming
This section provides concise instructions for using the ALE Programming mode.
This mode, reached under the PROG menu (see Figure 4 and Figure 5) is used to
configure the parameters needed by the ALE function. The ALE parameters are
identified in Figure 5.
Note
The Programming mode is accessible only if the radio is not
locked.
After locating the required ALE parameter in the Programming menu, you can
change it by pressing the function key next to the parameter name, and then press the
UP / DOWN keys to scroll or set parameters.
➤ To enter the ALE Programming mode:
1. Press MENU to display the Menu screen.
MENU
MOTOROLA
CHAN FREQ ALE BITs
2. Press MORE to scroll to the second Menu screen.
MENU
MOTOROLA
LOCK PROG PSW DIMs
3. Press PROG (F2).
4. Press ALE (F2) to enter the ALE Programming
mode.
PROG
MOTOROLA
RAD ALE LANG
5. Press MORE as required to access additional ALE
programming parameters.
ALE
PROGRAMMING
MOTOROLA
NET DIR AMD OPTs
In the ALE Programming mode, you can program the following features (see also
Figure 5).
Description See Page …
• NET Net parameters: station names, options, members
and scanned channels. 54
• RCV Edit the list of stations not appearing in the
directory from which calls have been received.
This item is displayed only after such calls have
been received, and therefore will not appear when
the MICOM-2 is just turned on. 58
_________________________________________________________________________________________________
53