Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 34)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide
LQA (F3) displays the channel on which the link was established, and the
LQA score of the current link.
Notes
• If the name of the station you are linked to is not in your
directory, this function will not be available.
• The LQA (F3) key is displayed only if you established the
link in the ALE mode (in the Channel mode, this function is
not available, because the call is received/transmitted on the
current channel).
MON (F4) turns on and off monitoring by means of the speaker.
MORE
RPL
(MORE, F1)
replaces the currently-used channel with a channel with a better
LQA score. The radio disconnects the link, replaces the channel
being used, and initiates the call once again.
Notes
• The RPL function is available only for individual calls, and
only for the call initiator.
• The RPL (F1) key is displayed only if you established the
link in the ALE mode (in the Channel mode this function is
not available, because the call is received/transmitted on the
current channel).
BAND
(MORE, F2)
toggles between upper sideband (USB) and lower sideband (LSB).
The sideband change takes places only after the current call is
ended.
SQ
(MORE, F3)
toggles the squelch on/off.
DSP
(MORE, F4)
accesses the Digital Signal Processing menu, which includes the
following options:
• CLAR (F1) – controls the clarifier (off/lower frequency/higher
frequency).
• NF (F2) – controls the notch filter (off/lower frequency/higher
frequency).
• CLIP (F3) – toggles the clipper on/off.
• NB (F4) – toggles the noise blanker on/off.
MORE
• ATTN (MORE, F2) – toggles the attenuator on/off.
20
_________________________________________________________________________________________________