Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 42)

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide
Note
While the radio is initializing the link, you can press STOP (F1)
or ESC to abort the entire process.
6. After the link is established, you will see a LINK message. Now you may
press the PTT and start talking.
7. To disconnect the link, press the ESC key.
Quick Call
A quick call is a call to the last station you tried to call (regardless of whether the call
was successful or not). In the ALE mode, the channel used for the original call is
reused for the quick call.
The Quick Call feature can be enabled or disabled as part of ALE parameters
programming.
Notes
• Quick Call will not transmit a message, even if the last call
contained a message.
• The first time the station is switched to the ALE or Channel
mode, quick call is not possible as no "most recent" station
data exists.
➤ To send a quick call:
Double-press the PTT of your microphone or handset.
The radio automatically tries to contact the last called station.
During this process, you will see TO alternating with the
number of the channel on which the set up request is
being sent (the channel may change, if the called station
does not answer on the first channel(s)).
TO
1234
MOTOROLA
STOP PAGE CHAN MONs
Note
While the radio is initializing the link,
you can press
STOP (F1) or ESC to
abort the entire process.
CH 2
1234
MOTOROLA
STOP PAGE CHAN MONs
28
_________________________________________________________________________________________________