Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 68)

MICOM-2ES/2RS/2TS ALE Supple
• DIR Directory: configuration of the ALE address list. 58
• AMD Messages: preparation of AMD messages to be
sent with ALE calls.
Note
You can also edit, or prepare a
new message, on-line.
58
• OPT Options: configuration of the various ALE options,
such as PTT timeout, external alarm, and so on. 59
• AUTO Autodial parameters: shortcuts for ALE calls to
frequently called stations. 61
• STOR Store the changes made in the ALE programming
session. 61
ment to Owner’s Guide
54
_________________________________________________________________________________________________
Description See Page …
Important
• The ESC key is used to cancel a change you have made, if not yet
confirmed. If you have already saved changes, the ESC key will
only return to a previous screen of the ALE Programming menu.
• When you end ALE programming, you must store the parameters
you defined.
If you press the MENU key to exit the programming mode
without first saving your changes, you will be prompted to store
the ALE configuration changes. Press
YES to store the
configuration. If you press NO , the configuration will revert to
the previous configuration, and any changes made in the current
ALE programming session will be ignored.
Programming Nets
When programming a net, you can set the net names, define the net members, add
channels, configure various options, copy parameters from a defined net or erase an
entire net.
Net Programming Overview
The net programming mode enables you to view and edit the configuration of each
net.
The configuration includes the following menus: