Minolta Magicolor 3100 Series - Manual (Page 230)

3-228
RRP9.4 SENSOR PHOTO:REGI (PL9.1.8)
Figure: SENSOR PHOTO:REGI Removal
Removal
1) Remove the CHUTE ASSY REGI. (RRP9.3)
2) Remove the ACTUATOR REGI. (RRP9.5)
3) Remove the connector (P/J181) on the SENSOR PHOTO:REGI from the CHUTE ASSY REGI
(PL9.1.6).
4) Release the hooks at 3 positions securing the SENSOR PHOTO:REGI to the SHUTE ASSY REGI.
5) Remove the SENSOR PHOTO:REGI from the CHUTE ASSY REGI.
Replacement
Replace the components in the reverse order of removal.