Muratec MFX-1200 User Manual

Page 98

Advanced features

Programming a batch transmission

For this operation to work, two things must be true:

The batch box you re using must exist on your fax machine.
You must know the batch box s identifier number (1 5).

To program a batch transmission into a programmable one-touch key:

Press Program key,

, 3, 0, 1,

ENTER

. The

LCD

shows the first empty pro-

grammable one-touch number available:

Note: If P2 appears on the

LCD

, it means that you have already entered a

number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:

Press

to go back to the programmable one-touch key you want to

enter.

Note: To erase a programmable one-touch key, see page 3.49.

Press the key that you want to program or change. Here, we ve selected P2.

Note: If your previous command for this key was for a batch transmission

and you want to keep this key programmed for a batch transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.

If you want to select a different programmable one-touch key than the one
that appears on the

LCD

, press that key now.

Press

ENTER

. The

LCD

asks which operation you want to program into the pro-

grammable one-touch:

Note: If changing a previously stored command, skip to step 7.

Press until

Communication appears.

Press

ENTER

ADVANCED FUNCTIONS

five times and then press

ENTER

. The

LCD

shows:

Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we ve entered 5:

Note: To change an identifier already entered, press

CANCEL

to erase it.

Then re-enter the correct identifier.

Press

ENTER

. The

LCD

asks if you want to make additional settings for this

programmable one-touch number.

If you do not want to make additional settings, press

ENTER

. Skip to step 16.

If you do want to make additional settings, press

and

ENTER

The

LCD

asks which resolution you want to use for this programmable one-

touch number.

Press

until the mode you want appears.

Note: For any of the following settings, choose ----- if you do not want to

specify the displayed setting for this programmable one-touch key.

Press

ENTER

. The

LCD

asks you to select a contrast mode for each programma-

ble one-touch number.

Press

until the mode you want appears.

Contrast :-------

←

←/→

→/Enter

Resolution :-----

←

←/→

→/Enter

Option :Off

←

←/→

→/Enter

Batch Tx
Enter Box No. :5

Batch Tx
Enter Box No. :_

Type :Communication

←

←/→

→/Enter

Type :Communication

←

←/→

→/Enter

Select Program No.
P2:No Number Stored

Select Program No.
P1:Polling Document

Select Program No.
P2:No Number Stored

3.45