Trademarks, Copyright, Energy saving – Muratec MFX-1200 User Manual

Page 3

Trademarks

Muratec, the Muratec logo and all Muratec fax product names contained herein are
trademarks of Muratec America, Inc.
E

NERGY

TAR

is a registered mark of the United States Environmental Protection

Agency.

As an Energy Star

partner, Muratec America, Inc., has deter-

mined that this product meets the Energy Star guidelines for
energy efficiency.

Energy saving

Your machine can save the energy with its Energy Saving Mode.
In the Energy Saving Mode the printer will not use its fusing lamp and Energy Save
Mode will be displayed on the

LCD

. If your machine receives a fax message or if any

key is pressed your machine will automatically wake up.
The time for the machine to enter the Energy saving mode can be selected from 1 to
120 minutes. For details, see Setting sleep mode, page 4.10.

Super G3 is an extension of Group 3 fax technology standards,
allowing the use of high-speed

ITU

T V

.34 bis modems for 33.6

Kbps transmission and high-speed protocols for rapid handshak-
ing.

JBIG

Joint Bi-level Image experts Group, the new

ITU

stan-

dard image data compression method. As

JBIG

compresses the

data more efficiently than

MMR

, it is especially effective when

transmitting halftone (grayscale) image document.

Note:

Super G3 and JBIG are available only for MFX-1600.

This manual and any updates to it can be found online at www.muratec.com
Go to the Products section of this site, then click on MFX-1200/1600