Muratec MFX-1200 - Manual (Page 37)

2.6
Basic operation
12 At the end of the operation, your fax machine beeps and displays:
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see Redialing, page 2.7.
Sending a fax using
MONITOR
/
CALL
key or a handset
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: In this function, you cannot send a fax using the FBS glass.
1 Insert the document to the ADF .
2 Adjust resolution and contrast if necessary.
3 Obtain a dial tone, either by:
Pressing MONITOR / CALL
o r
Lifting the optional handset.
In either case, the LCD shows:
4 Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
5 When you hear fax tones from the remote unit, press START .
Note: If a person answers the phone, use the optional handset to tell that
person that you re trying to send a fax. When you hear fax tones,
press
START .
6 If you re using an optional handset, hang up after pressing START .
7 At the end of the operation, your fax machine beeps and displays:
Note: If the call fails and you used MONITOR / CALL to dial, press
MONITOR / CALL to hang up. Or if you ve pressed START to begin the fax
transmission, press STOP to end it.
Also see Redialing manually, next page, if the call fails.
919725552009
** Complete **
** Tel Mode **
919725552009_
** Tel Mode **
_
919725552009
** Complete **