Muratec MFX-1200 - Manual (Page 93)

Advanced features
18 Press ENTER . The LCD asks if you want to send a cover page for this program-
mable one-touch number.
19 Press until the mode you want appears.
20 Press ENTER . The LCD asks if you want to turn the Fax & Copy feature on or
off for this programmable one-touch number.
21 Press until the mode you want appears.
22 Press ENTER .
23 Press STOP to return your machine to standby mode.
Programming regular polling
To program a regular polling operation into a programmable one-touch key:
1 Press Program key, A , 3, 0, 1, ENTER . The LCD shows the first empty pro-
grammable one-touch number available:
Note: If P2 appears on the LCD , it means that you have already entered a
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Press to go back to the programmable one-touch key you want to
enter.
2 Press the key that you want to program or change. Here, we ve selected P2.
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
Note: To erase a programmable one-touch key, see page 3.49.
3 If you want to select a different programmable one-touch key than the one
that appears on the
LCD , press that key now.
4 Press ENTER . The LCD asks which operation you want to program into the pro-
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5 Press until Communication appears.
Type :Communication
← ←/→ →/Enter
Type :Communication
← ←/→ →/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
Fax & Copy :---
← ←/→ →/Enter
Cover Page :---
← ←/→ →/Enter
3.40