Muratec MFX-1200 - Manual (Page 44)

2.13
Basic operation
Stacking multiple copies
1 Press COPY / FAX to change to Copy mode.
2 Turn the sort setting off. (See page 2.16.)
Note: The default setting of sorting is on.
3 Place your original document in ADF face up, or on the FBS glass face
down just as you would to send a fax.
4 Enter the document size by pressing the DOCUMENT SIZE .
5 Using the numeric keypad to enter the number of copies you want (up to 99).
6 As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: For details about each items, see Making copy settings, page 2.15.
7 Press START .
Note: To stop the copying, press STOP .
Sorting multiple copies (using ADF)
Note: You cannot use the FBS glass for sorting multiple copies.
1 Press COPY / FAX to change to Copy mode.
2 Make sure the sort setting is turned on. (See page 2.16.)
3 Place your original document in ADF face up, just as you would to send a
fax.
4 Enter the document size by pressing the DOCUMENT SIZE .
5 Using the numeric keypad to enter the number of copies you want (up to 99).
6 As needed, set the following:
Select document type and adjust image contrast
Set copy reduction ratio
Note: For details about each items, see Making the copy settings, page 2.15.
7 Press START .
Note: To stop the copying, press STOP .
Enlarged or reduced copies
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the FBS ; it is not
available for copying using the ADF .
1 Press COPY / FAX to change to Copy mode.
2 Place your original document in ADF face up, or on the FBS glass face
down just as you would send a fax.
Note: If you want to enlarged copy, use FBS glass.
3 Enter the document size by pressing the DOCUMENT SIZE .
4 Choose an enlargement or reduction ratio using or of the cursor key.
You can reduce to 78%, 64 % or 50 % of the original size
O R
You can enlarge to 129% or 200 %
O R
Press ZOOM to turn the ZOOM light on, and adjust the ratio at 1% steps using
or of the cursor key. You can enter the ratio between 50% and 200%.
O R
Directly enter any percentage between 50 % and 200 % by following proce-
dure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
129%: Half-letter (5.5
″
8.5
″
)
→
Letter (8.5
″
1 1
″
)
78%: Legal (8.5
″
1 4
″
)
→
Letter (8.5
″
1 1
″
)
Helpful Tip: You can set the copy reduction or enlargement ratio to Auto .
(See Setting copy auto, page 4.7.) If the Auto is set and you
set the document size by pressing
DOCUMENT SIZE , the machine
automatically reduce or enlarge the original size (you entered)
to fit on the paper size you selected.
5 As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6 Press START .
Note: To reset the copy parameter to default setting, press COPY RESET .
Note: To stop the copying, press STOP .