Muratec MFX-1200 User Manual
Page 91
Advanced features
17
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to
set for this programmable one-touch number.
18
Press
until the mode you want appears.
19
Press
ENTER
. The
LCD
asks if you want to send a cover page for this program-
mable one-touch number.
20
Press
until the mode you want appears.
21
Press
ENTER
. The
LCD
asks if you want to turn the Fax & Copy feature on or
off for this programmable one-touch number.
Note: When the memory transmission is set to off in step 15, this
LCD
will
not appear and go to step 24.
22
Press
until the mode you want appears.
23
Press
ENTER
.
24
Press
STOP
to return your machine to standby mode.
Programming a broadcast / group
Programming a broadcast is very similar to programming a delayed transmission.
But instead of sending to just one phone number, you set up multiple numbers for
the transmission.
To program a broadcast / group into a programmable one-touch key:
1
Press Program key,
A
, 3, 0, 1,
ENTER
. The
LCD
shows the first empty pro-
grammable one-touch number available:
Note: If P2 appears on the
LCD
, it means that you have already entered a
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.49.
2
Press the key that you want to program or change. Here, we ve selected P2.
Note: If you re changing a previously stored command: If your previous com-
mand for this key was a for a broadcast/group transmission, and you
want to keep this key programmed for a broadcast/group transmis-
sion, use these instructions to make changes. But if you want to
assign this key to a completely different operation for batch transmis-
sion, then you must first erase the stored command before
programming the new one.
3
If you want to select a different programmable one-touch key than what
appears on the
LCD
, press that key now.
4
Press
ENTER
. The
LCD
asks which operation you want to program into the pro-
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
Type :Communication
←
←/→
→/Enter
Select Program No.
P2:No Number Stored
Select Program No.
P1:Polling Document
Select Program No.
P2:No Number Stored
Fax & Copy :---
←
←/→
→/Enter
Cover Page :---
←
←/→
→/Enter
Report :---
←
←/→
→/Enter
3.38