Muratec MFX-1200 - Manual (Page 90)

Advanced features
4 Press ENTER . The LCD asks which operation you want to program into the pro-
grammable one-touch:
Note: If changing a previously stored command, skip to step 7.
5 Press until Communication appears.
6 Press ENTER . The LCD now shows either:
or
7 Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or to scroll to the right.
Important: Do not press ENTER .
8 Now, while you can still see the fax number on the LCD , press
ADVANCED FUNCTIONS , ENTER . The LCD shows:
9 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
PM on the 30th. )
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, Do this at 5:05
PM today. )
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
10 Press ENTER , ENTER . The LCD asks if you want to make additional settings for
this programmable one-touch number.
If you do not want to make additional settings, press ENTER . Then skip to step
24.
If you do want to make additional settings, press
and ENTER .
11 The LCD asks which resolution you want to use for this programmable one-
touch number.
12 Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to
specify the displayed setting for this programmable one-touch key.
13 Press ENTER . The LCD asks you to select a contrast mode for each programma-
ble one-touch number.
14 Press until the mode you want appears.
15 Press ENTER . The LCD asks if you want the memory transmission on or off
when using this programmable one-touch number.
16 Press until the mode you want appears.
Memory Tx :---
← ←/→ →/Enter
Contrast :-------
← ←/→ →/Enter
Resolution :------
← ←/→ →/Enter
Option :Off
← ←/→ →/Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
Delayed
Enter Time: 11/20:30
P2:Fax#/Advan.Func.
9-5550629_
P2:Fax#/Advan.Func.
9-5558743_ P2:Fax#/Advan.Func.
_
Type :Communication
← ←/→ →/Enter
Type :Communication
← ←/→ →/Enter
3.37