Muratec MFX-1200 - Manual (Page 88)

Advanced features
13 Press START .
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows Reserved on the
LCD , indicat-
ing that it has stored the command in memory and will complete it later.
F-Code polling
1 Press FAX to switch the machine to Fax mode.
2 Press ADVANCED FUNCTIONS four times and then press ENTER .
3 Use the numeric keypad to enter the appropriate sub-address.
In this example, we ve entered 123456.
Note: If you make a mistake, press CANCEL to erase the character, then
enter the correct number.
4 Press ENTER . The LCD shows:
Note: If this sub-address does not have a password, skip to step 6.
5 Use the numeric keypad to enter the password. In this example, we ve
entered 654321.
6 Press ENTER . The LCD shows:
7 Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START .
8 What you do now depends upon when you want the polling to begin.
To have it begin now, skip to step 11.
To delay it, go on to step 9.
9 Press ADVANCED FUNCTIONS , ENTER . The LCD shows:
10 Use the numeric keypad to enter the day and time when the polling should
begin, then press
ENTER .
11 Press START .
If in step 8 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows Reserved on the
LCD , indicating that
it has stored the command in memory and will complete it later.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
3.35