Muratec MFX-1200 User Manual

Page 86

Press

ENTER

. The

LCD

shows:

Note: If the F-Code security box is not storing any documents, the machine

briefly displays the following before returning to step 2:

Use the numeric keypad to enter your F-Code box s four-digit

. code.

Here we ve entered 2345:

Press

ENTER

If you ve entered the correct

. code, your fax machine prints all docu-

ments in the F-Code security box and then erases them.
If you ve entered an incorrect

. code, your fax machine aborts the opera-

tion and returns to standby mode.

Using a relay box

Once your fax machine receives a document via

ITU

sub-addressing to one of its F-

Code relay boxes, it sends it to the other fax machines that you ve set up on your
relay box. (See Creating or Modifying an F-Code box , pages 3.26 3.27.)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See If you chose
Relay, page 3.29 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine s F-Code box and get that machine to relay it to others. See F-Code trans-
mission on pages 3.34 3.35 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)

To erase an empty F-Code box:

Press Program key,

, 4, 0, 2,

ENTER

. The

LCD

shows:

Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase. Here, we ve entered 0, 3 and see:

If you want to erase a different F-Code box than the one that appears on the

LCD

, enter the box number now.

Press

ENTER

. If the F-Code box is empty, the

LCD

shows:

Important: If you select an F-Code box which is not empty, the machine

beeps and, before returning to step 3, briefly displays:

Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.

Use the numeric keypad to enter the four-digit

. code.

Here, we ve entered 2345:

03:Erase F-Code Box
Enter I.D. Code:2345

Select F-Code Box
Box In Use

03:Erase F-Code Box
Enter I.D. Code:****

Select F-Code Box
03:Muratec America

Select F-Code Box
01:Murata Machinery

Select F-Code Box
01:No Number Stored

03:F-Code Document
Enter I.D. Code:2345

03:Select F-Code Box
No Document Stored

03:F-Code Document
Enter I.D. Code:****

Advanced features

3.33