Muratec MFX-1200 - Manual (Page 115)

3 Press ENTER to save the setting. The LCD shows the current reduction margin:
4 Use the numeric keypad to enter the reduction margin you want. If
necessary, press
or to move the cursor. In this example, we ve chosen
38mm.
5 Press ENTER to save the setting. The LCD shows the current setting for
half-page reception:
6 Press or until the setting you want appears. In this example, we ve cho-
sen On.
7 Press ENTER to save the setting.
Setting the number of rings
Default setting: 2 time.
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 9 rings.
1 Press Program key, B , 2, 0, 3, ENTER . The LCD shows:
2 Use the numeric keypad to enter the number of rings you want, from 1 to 9.
Here, we ve chosen 4 rings.
Note: If you enter the number except 1-9, the machine will beep briefly to
warn you that it can t accept that setting.
3 Press ENTER to save the setting.
Image Rotation
Default setting: OFF.
Note: This feature is available only for the MFX-1600 model.
When this feature is activated, incoming fax messages will be rotated automatically
to fit on the paper.
1 Press Program key, B , 2, 1, 4, ENTER . The LCD shows:
2 Press or until the setting you want appears. In this example, we ve cho-
sen On.
3 Press ENTER to save the setting.
Rotate Rx :On
← ←
/
→ →
/Enter
Rotate Rx :Off
← ←
/
→ →
/Enter
Your
Fax
Machine
A
11"
8.5"
A
11"
8.5"
# Of Rings
# (1-9):4
# Of Rings
# (1-9):2
Half Page Recpt.:On
← ←
/
→ →
/Enter
Half Page Recpt.:Off
← ←
/
→ →
/Enter
Margin
(00-85mm):38
Margin
(00-85mm):40
Changing the default settings
4.4