Marantz SR8002 - Manual (Page 73)

70
ENGLISH
5. After selecting the fi rst character to be entered,
press the MEMORY or ENTER button, or press
the MEMO button on the remote controller.
The entry in this column is fi xed and the next
column starts to fl ash. Fill the next column the
same way.
To move back and forth between the characters,
press the 1 / 2 cursor buttons or press CH+ or
CH– button on the remote controller.
Note:
• Unused columns should be filled by entering
blanks.
6. To save the name, press the MEMORY or
ENTER button on the front panel, or press the
MEMO button on the remote controller for more
than 2 seconds.
Instead of using the 3 and 4 cursor buttons
or the SCAN+ and SCAN– buttons of the
remote controller unit to select characters,
characters can be input from the numeric keys
of the remote controller. See the below table
for a correspondence between characters and
numeric keys.
Ten keypad Press, press again, press again, etc.
1 A → B → C → 1 → A
2 D → E → F → 2 → D
3 G → H → I → 3 → G
4 J → K → L → 4 → J
5 M → N → O → 5 → M
6 P → Q → R → 6 → P
7 S → T → U → 7 → S
8 V → W → X → 8 → V
9 Y → Z → space → 9 → Y
0 – → + → / → 0
Note:
On the SR8002, when the unit receives HD Radio
and RBDS broadcasts, the HD Radio and RBDS text
data is displayed. Therefore, the preset station names
entered with this function are not displayed.
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset channel
to be entered using alphanumeric characters.
Before name inputting, you need to store preset
stations with the preset memory operation.
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
VOLUME
UP DOWN
STANDBY PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8002
M-DAX MENU PURE DIRECT THX
7.1CH INPUT
MODE AUTO MULTI
A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND SPEAKER MULTI
DSD
POWER ON/OFF ENTER
L C R SL S SR LFE DIGITAL SURROUND V-OFF DISP MULTI AUTO TUNED ST SPKR A B NIGHT PEAK ANALOG DIGITAL ATT SLEEP SURR DIRECT AUTO DISC 6.1 MT X 6.1 EQ PCM AAC
5. 2. 5. 6. 4.
SOURCE
D4
D5
D2
M
D1
D3
D5
4.
4.
4.
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
D2
D1 OK
VOL CH
PREV MUTE LIP.SYNC
CH
5.
5.
8
0
9 7
MEMO CLEAR
THX
2.
5.
6.
MEMO
1. Recall the preset number to be inputted name
with the method described in “Recalling” a
preset station.
2. Press the MEMORY button on the front panel
or press the MEMO button on the remote
controller for more than 3 seconds.
3. The left most column of the station name
indicator fl ashes, indicating the character entry
ready status.
4. When you press the 3 or 4 cursor buttons on
the front panel or the SCAN+ or SCAN– buttons
on the remote controller (page 4), alphabetic
and numeric characters will be displayed in the
following order:
A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +
→ / → (Blank) → A
UP →
→ DOWN
FOR LISTENING TO HD Radio STATIONS
(SR8002 ONLY)
HD Radio technology brings digital radio to
conventional analog AM and FM radio stations, with
improved sound quality, better reception, and new
data services.
HD Radio technology provides CD-quality sound for
FM stations, and FM-quality sound for AM stations.
In addition, FM HD Radio stations can transmit
multiple programs on the same frequency by using
multicast channels.
Text data display incudes station name, song title,
artist name, and so on.
For more information about HD Radio technology,
visit: www.ibiquity.com
TUNING MODE
HD Radio stations transmit analog and digital signals
for broadcast programs.
You can change the TUNING mode to the desired
signal type.
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
VOLUME
UP DOWN
M-DAX R A/B
T-MODE MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
L C R SL S SR LFE
DIGITAL SURROUND V-OFF NIGHT PEAK ANALOG DIGITAL ATT 6.1 EQ PCM AAC
D4
D5
D2
M
D1
D3
D5
VOL CH
USE PAGE 1
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCR DVD TV
1 2 LIGHT
Learning Remote Controller RC8001SR
TUNER
1. Press the > button on the remote controller to
display Page 2.
2. Each time the T-MODE (D4) button is pressed,
the TUNER mode changes and the mode is
displayed on the FL display.
Analog/Digital Auto Mode
T - M O D E : D I G - A T
Use this mode when listening to HD Radio stations.
(It is recommended that you normally use this
mode.)
AUTO STEREO mode is selected and the AUTO
indicator is illuminated on the FL display.
When stereo broadcasts are received, the ST
indicator is illuminated on the FL display.
When an HD Radio (digital) signal is received, the
DIGITAL indicator is illuminated on the FL display.
Note:
In this mode, if the strength of the HD Radio signal is
weak, the unit automatically changes to Analog mode
to receive the analog signal.
Analog Auto Mode
(when receiving FM broadcasts)
T - M O D E : A N A - A T
In this mode, the unit receives only analog signals
and changes to AUTO STEREO mode.
See p.68 for more information on Analog received.
(Only analog broadcasts are received.)
Notes:
• In this mode, HD Radio signals cannot be received.
(Only analog broadcasts are received.)
• This mode is not available when BAND is set to
AM.
Analog Mono Mode
T - M O D E : M O N O
In this mode, the unit receives only analog signals
and changes to Monaural mode.
See p.68 for more information on Analog Mono
Mode.
Note:
In this mode, HD Radio signals cannot be received.
(Only analog broadcasts are received.)