Marantz SR8002 - Manual (Page 16)

ENGLISH
13
SETTING THE TIME
Example: Setting to 6:20PM (18:20)
When you bought this remote controller and insert
the batteries to the remote controller at fi rst, the steps
1 to 3 are skipped.
Starts from step 4 to set the time.
1. Hold down the M button for three seconds or
more.
The menu is displayed.
2. Press the > button once.
This displays second page (SETUP).
3. Press the D4 (CLOCK) direct button.
The “ ” indicator blinks and the clock indicator
displays “0:00”.
4. Press the 1 and 8 numeric button to set the
hour indicator.
The hour indicator displays “18”.
The minute indicator blinks “_”.
5. Press the 2 and 0 numeric button to set the
minute indicator.
The minute indicator displays “20”.
The hour indicator blinks.
6. Press the OK cursor button to start the clock.
The clock starts from 0 second at the time that was
set and return to normal (USE) mode.
Whenever the batteries are replaced, the clock
shows 00:00. Please reset the clock. (The time
setting is not backed up.)
CHECKING THE TIME
To check the time, hold down the > button for three
seconds or more. The current time is displayed for
fi ve seconds.
Note:
• Although the remote controller uses a quartz clock,
the time may become out of sync over the course of
operation. Be sure to correct the clock from time to
time.
GENERAL INFORMATION OF RC8001SR TO THE UNIT
To control the unit by your RC8001SR, you have to select the device AMP or TUNER by pressing the function
selector button. Please refer below for the details in AMP and TUNER mode.
2 3 1
5 6 4
8
0
9 7
MEMO CLEAR
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCR DVD TV
SOURCE
OFF ON/OFF POWER ON
D4
D5
D2
M
D1
D3
D5
OK
VOL CH
PREV MUTE
MENU EXIT
GUIDE
TEST CH.SEL
LIP.SYNC
SURR
7.1CH ATT SPK-AB
DISP OSD
THX
SLEEP
1 2 LIGHT
Learning Remote Controller RC8001SR
2.
6.
4.
5.
3.
1.
2 1
8
0
OK
D4
M LEARN
NAME
MACRO
USE PAGE 1 2 3 4
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
5 6
3 4
1 2
LEARN
NAME
MACRO
USE PAGE 1 2 3 4
AMP MODE
2 3 1
5 6 4
8
0
9 7
MEMO CLEAR
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCR DVD TV
SOURCE
OFF ON/OFF POWER ON
D4
D5
D2
M
D1
D3
D5
OK
VOL CH
PREV MUTE
MENU EXIT GUIDE
TEST CH.SEL SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
1 2 LIGHT
Learning Remote Controller RC8001SR
D1
D5
D4
D2
D3
D5
SOURCE
OFF ON/OFF POWER ON
OK
2 3 1
5 6 4
8 9 7
TEST CH.SEL
LIP.SYNC
THX
SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
MENU
TAPE
DSS
AUX2 AUX1
TUNER CD CD-R MD
VCR DVD TV
AMP
VOL
EXIT
MUTE
LEARN NAME
USE PAGE 1 2 3 4
SOURCE ON/OFF Turns the SR7002/SR8002 on and off
POWER ON Turns the SR7002/SR8002 on
POWER OFF Turns the SR7002/SR8002 off
D1 - D5 / >(Page) (Refer to page vi)
VOL +/- Adjust the over all sound level
MUTE Decreases the sound temporarily
Cursor Move the cursor for setting in SETUP MENU mode
OK Enter the SETUP MENU
Confi rms the setting in SETUP MENU mode
MENU Enter the SETUP MENU
EXIT Exits from SETUP MENU
TEST (1) Enter the test tone menu
CH.SEL (2) Call up SETUP MENU and adjusts speaker levels or 7.1ch
input setup
SURR (3) Selects the surround mode
7.1CH (4) Selects the 7.1CH IN
ATT (5) Reduces the input level
SPK-AB (6) Selects the speaker system
DISP (7) Changes the front display mode
OSD (8) Displays the current setting on the monitor
SLEEP (9) Sets the sleep timer function
THX (0) Selects the THX mode
Function selector Selects a particular source component
GUIDE / LIP.SYNC Selects the LIP.SYNC mode
TUNER MODE
2 3 1
5 6 4
8
0
9 7
MEMO CLEAR
DSS
AMP AUX2 AUX1 TAPE
TUNER CD CD-R MD
VCR DVD TV
SOURCE
OFF ON/OFF POWER ON
D4
D5
D2
M
D1
D3
D5
OK
VOL CH
PREV MUTE
MENU EXIT GUIDE
TEST CH.SEL SURR
7.1CH ATT SPK-AB
DISP OSD SLEEP
1 2 LIGHT
Learning Remote Controller RC8001SR
D1
D5
D4
D2
D3
D5
2 3 1
5 6 4
8 9 7
TEST CH.SEL SURR
7.1CH ATT
LIP.SYNC
SPK-AB
DISP OSD
THX
SLEEP
TUNER
0
CH
GUIDE
MEMO CLEAR
USE PAGE 1
D1 - D5 / >(Page) (Refer to page vi)
CH +/- Selects a preset station up and down
GUIDE Selects the “Frequency direct input”
0–9 Input the numeric
MEMO Enter the tuner preset memory numbers
CLEAR Clears the inputting
TUNER Selects a frequency band