Minolta PS7000 - Manual (Page 58)

5-2
Op
er
a
tio
n
Cha
p
te
r 5
Lamp status
Half intensity
The Scanner’s lamp lights at half intensity when any key is pressed to select menus, etc.
The lamp goes out when no key is pressed for the preset time*. The fan cooling the lamp is
turned off one minute after the lamp has gone out.
* The auto-off time for the lamp can be set to one, three, or five minutes in the Utility mode.
Full intensity
The Scanner’s lamp lights at full intensity when the Scanner is reading the original. The
lamp returns to half intensity after scanning is completed.
NOTE
The halogen lamp used in the Scanner is safe and not hazardous to health. However, never
look directly at the lamp when lit. Looking directly at the lamp when lit may result in eye
damage. When the Scanner is operated for a long time, we recommend you take a 5 minute
break every hour to rest your eyes.