Motorola 9520 - Manual (Page 152)

150
Your PIN2 is
blocked.
Enter the PIN2 unblocking key (PUK2) or contact your
service provider. See “Unblock the PIN2 Code” on
page 108 for additional information.
Your SIM card will
not work.
• Is the card inserted the correct way?
• Is the gold chip visibly damaged or scratched? Return
the card to your service provider.
• Check the SIM and phone contacts. If they are dirty,
clean them with an antistatic cloth.
You can’t cancel
Call Forwarding
or Call Barring.
Wait until you are in an area with good network coverage
and try again.
The
o
(message)
indicator is
flashing.
There is not enough memory available to store another
message. Use the Messages menu to delete one or
more messages.
You find your
phone becoming
warm during use. You may notice this during long calls or during charging.
The heat is produced by the electronic components
within your phone and is quite normal.
Your SIM card is
inserted in the
phone but the
display says:
• Check Card or Insert Card .
Check that the SIM card has been inserted correctly.
The contacts of the SIM card may be dirty. Turn the
phone off, remove the SIM card and rub the gold chip
on the card with a clean cloth. Replace the card in the
phone.
• Blocked or
!
Blocked
Enter the PIN unblocking key (PUK1) or the PIN2
unblocking key (PUK2) respectively, or contact your
service provider. See “Unblock the PIN Code” on
page 106 and “Unblock the PIN2 Code” on page 108
for additional information.
• Bad Card See Supplier .
Please contact your service provider.
You find your
phone’s prompts
in a language
other than your
own.
Press
M 2 6 O
. This routes you directly to the
language selection submenu. Press
M
until you see
your preferred language. Press
O
to select.
Problem Solution