MK Diamond Products MK-370EXP - Manual (Page 38)

38
BLADE WILL NOT CUT PROPERLY
(B)
Check for proper rotation
(A)
Check for Smoothness or
“Glazing" (Dress blade if
needed)
(C)
Ensure the Blade Core is
not bent and Arbor is not
out of round
(D)
Verify the blade is correct
for the material being used
MOVABLE CUTTING TABLE DOES NOT MOVE CORRECTLY
(B)
Check the Movable Cutting
Table Roller Wheel for
wear replace if necessary
(A)
Check that the Guide Bar
is clean – clean if dirty
MK-370EXP TROUBLESHOOTING