MK Diamond Products MK-370EXP - Manual (Page 26)

26
CLEANUP
NOTE: Dispose of wastewater in accordance with applicable Federal, State and Local laws.
(B)
Fill the Water Pan with
clean water
(A)
Remove the pump Suction
Screen and clean the Water
Pump of all debris.
(See pump manual for more
detail)
(C)
Run the MK-370EXP until
clear water is seen at the
blade Cooling Flow Points
(Approx. 1 minute)
(E)
Unplug the GFCI from the
Power source
(D)
Ensure the ON/OFF Switch
is in the OFF position
(F)
Unplug MK-370EXP from
the GFCI
Ensure the saw is disconnected before completing the remainder of the cleanup process.
(H)
Dispose the contents of
the Water Pan
(G)
Remove the Cutting
Assembly from the Water
Pan
(I)
Clean the MK-370 with
soap and clean water
GFCI
CAUTION
MK-370EXP MAINTENANCE