MGE UPS Systems Comet TM 5 - 30 kVA - Manual (Page 9)

Comet installation and user manual: E-6761200XT/FA Merlin Gerin by MGE UPS SYSTEMS 1.1
introduction to Comet
safety information
A configuration sheet, included with the UPS, indicates all the factory settings.
Keep the sheet in a safe place as it may be required by the after-sales support
technicians if you wish to modify parameters.
Danger: high voltages are present inside the Comet system. Any servicing
requiring removal of the protection covers may be undertaken only by qualified
personnel certified by MGE UPS SYSTEMS.
Read the label (figure 1) on the back of Comet or inside the door to familiarise
yourself with the characteristics of your UPS.
identification to Comet
(1): Comet model number:
■ S11 (series 11): single-phase input power and single-phase load;
■ S31 (series 31): three-phase input power and single-phase load;
■ S33 (series 33): three-phase input power and three-phase load.
Fig. 1
Identification plate
configuration
comet S. (1)
RESEAU 1 - MAINS 1 - NETZ 1
RESEAU 2 - MAINS 2 - NETZ 2
UTILISATION - LOAD - AUSG
Mains 1 characteristics
(AC input)
Mains 2 characteristics
(optional AC bypass
input)
load characteristics
serial number
MERLIN GERIN
4
3
2
1