MGE UPS Systems Comet TM 5 - 30 kVA - Manual (Page 49)

Comet installation and user manual: E-6761200XT/FB 11.1 Merlin Gerin by MGE UPS SYSTEMS
appendices
general characteristics
■ the Comet range is made up of three types of uninterruptible power supplies:
■ ■ Comet series 11 (single-phase input, single-phase output),
■ ■ Comet series 31 (three-phase + neutral input, single-phase output),
■ ■ Comet series 33 (three-phase + neutral input, three-phase + neutral output);
■ each UPS may be configured in a number of manners via a special interface
14 .
On the following pages, standard configuration parameters are indicated in bold
type.
A modification in the configuration requires on-site servicing by the after-sales
support department;
■ except where indicated, the data provided are typical values corresponding to:
■ ■ a rated single-phase voltage of 230V and a rated three-phase voltage of 400V,
■ ■ a linear rated load with a power factor of 0.8.
range characteristics
■ standards
■ ■ design: CEI 146
■ ■ product: EN 50091
■ ■ safety: CEI 950
■ ■ protection: CEI 529 (IP 215)
■ ■ electromagnetic compatibility: CEI 801
EN 55011
EN 55022
EN 50091-2
■ environment conditions
■ ■ ambient temperature (1) : < 25
°
C recommended
0 to 30
°
C permanent
35
°
C up to 24 hours
40
°
C up to 8 hours
■ ■ relative humidity (%): 0 to 95
■ ■ maximum altitude without derating: < 1000m
■ configuration
■ ■ low battery shutdown warning (minutes): 1, 2, 3, 4, 5, ...20
■ ■ inverter start-up: automatic or manual
■ ■ battery charger: internal or external
■ ■ transfer to bypass outside tolerances: yes / no
■ ■ frequency converter: yes / no
■ colour
■ ■ standard: RAL 9002
(1): for a 5 kVA Comet S11 or S31, see the "overload" section.