Mark Levinson N32 - Manual (Page 63)

4-19
Nº32 Reference Preamplifier Controls and Modes
Table 4-3: N°32 shared link controls.
Component
Link Control Digital Audio
Processors
Digital
Transports
N°32
(preamplifier)
Power Amplifiers
Display Intensity
Link Maintains consistent front panel display character illumination among all linked com-
ponents. Adjusting display intensity for one linked component simultaneously adjusts
display intensity for all other linked components.
Standby Link • Placing the
linked digital
audio processor
into standby also
places all linked
digital trans-
ports into
standby.
• Taking the linked
digital audio
processor out of
standby also
takes the linked
Nº32 out of
standby.
• Placing a linked
digital transport
into standby has
no affect on
other linked
components.
• Taking a linked
digital transport
out of standby
also takes the
linked Nº32 out
of standby.
• Placing the
linked Nº32 into
standby also
places all other
linked compo-
nents into
standby (if those
components are
not involved in
recording).
• Taking the linked
Nº32 out of
standby also
takes all linked
power amplifiers
out of standby.
• Placing a linked
power amplifier
into standby also
places all other
linked power
amplifiers into
standby.
• Taking a linked
power amplifier
out of standby
also takes all
other linked
power amplifiers
out of standby.
Playback Link Pressing the play button on a linked digital transport automatically takes all other
linked components out of standby and selects the associated input on the linked digi-
tal audio processor and Nº32.
Input Selection
Link Press and hold the digital transport remote control select button
to toggle between selecting digital inputs on the linked digital
audio processor and selecting analog inputs on the linked Nº32.
Press and release the digital transport remote control select but-
ton to scroll through all available digital or analog inputs
(depending on whether the digital audio processor or Nº32 is
selected). The digital transport front panel displays the name
and volume level of the selected input. N/A
Record Mode
Link Placing the linked Nº32 into standby will not place the linked
Nº 30, Nº 30.5, Nº 30.6, Nº 31, or Nº 31.5 into standby if the
linked digital audio processor is in record mode OR if the linked
digital transport is in record link mode. A message will display
on the linked digital audio processor and digital transport indi-
cating that these components are involved in recording. N/A
HDCD™ Link Configuring the
linked digital audio
processor for an
HDCD recording
session automati-
cally attenuates the
linked Nº32 mas-
ter volume level
the required –6dB. N/A Configuring the
linked digital audio
processor for an
HDCD recording
session automati-
cally attenuates the
linked Nº32 mas-
ter volume level
the required –6dB. N/A